Glossary Terms For Cable Assemblies

Cable Coated OD
The Outside Diameter of the cable. This measurement includes the coating around the cable. Standard sizes are: 1/8" (.125"), 3/16" (.1875"), and 1/4" (.25").

Cable Length - Pull-Point
The Pull-Point is measured from end to end on the cable assembly at their functional point. This can be found by using the reference sheet pictured here to get the exact Pull-Point for your cable. Start at the Pull-Point of one end and measure to the other end's Pull-Point. Note: FitnessRepairParts.com does not offer the ability to custom-make a cable assembly.

End #1
The first end on a cable assembly. Use the reference sheet here to locate the correct end for your cable assembly. Locate the first end alphabetically and then by the dimensions needed. Note: The 13 in ends A & B are threads per inch. Note: FitnessRepairParts.com does not offer the ability to custom-make a cable assembly.

End #2
The second end of the cable assembly. Use the reference sheet here to locate the correct end for your cable assembly. Locate the second end by the dimensions needed. Note: The 13 in ends A and B are threads per inch. Note: FitnessRepairParts.com does not offer the ability to custom-make a cable assembly.