| Retainer, Cable U-Clip 67000003
|
| Pin, Selector 67000006
|
| Roller, Foam 67000106
|
| Spring, Extension 67000057
|
| Wire, Extension 10" 67000103
|
| Weight Stack Bumpers 67000008
|
| Grip 67000386
|
| Plate, Weight 5lb Add-On 67000271
|
| Handle, Single 67000095
|
| Pad, Leg Developer 67000159
|
| Pulley, Cable 67000055
|
| Cable Assembly, High Pulley/Stack 153.2" Long 67000369
|
| Strap, Ab Crunch 67001097
|
| Strap, Ankle 67000093
|
| Cable 28.18" 67000371
|
| Endcap 67000150
|
| Plate Selector Shaft 67000007
|
| Add-on plate-2.5 pound 67000270
|
| Spacer 67000013
|
| Spring 67000045
|
| Cable Assembly, Butterfly Station 70.84" 67000129
|
| Door, Access 67000105
|
| Grip, Stainless Steel End Cap 67001013
|
| Plug, Push In Black 67000663
|
| No Longer Available Attachment, Squat, Left 67000130
|
| Bar, Lat 67000204
|
| Bushing, Nylon 67000916
|
| Labels, Weight Stack, Standard 67000193
|
| Screw 67000070
|
| Washer 67000002
|
| Bar, Curl 67000213
|
| Pad, Foam Roller, Tapered 67000197
|
| Plate, Weight, 10LB 67000009
|
| Anchor, Cable Clip 67000413
|
| No Longer Available Attachment, Squat, Right 67000131
|
| Bracket, Single Moving Pulley 67000191
|
| E-Ring, External 67000044
|
| Pulley, Double Moving 67000109
|
| Screw 67000005
|
| No Longer Available Squat, Contoured Attachment, Left 67001090
|
| No Longer Available Bench, Seat Back 67000203
|
| Bench, Seat Bottom 67000583
|
| Cable Set/Kit-1850 Complete 67000869
|
| No Longer Available Cable Stop, Slotted 67000508
|
| Grip-4 Inch for inner section of lat bar 67000108
|
| Spring 67000573
|
| Bearing 67000038
|
| Block, Butterfly Arms Pawl 67000572
|
| No Longer Available Block, Low Row/Calf 67001010
|
| Bolt 67000110
|
| Bolt, Long Button Head 67000087
|
| Cable Assembly, AB/Leg Column 79.0" Long 67000372
|
| Cable Assembly, Press/Main Col. 137.0" Long 67000370
|
| Guide Rod Assembly 67000868
|
| Poster 67000848
|
| Screw 67000157
|
| Squat, Contoured Attachment, Right 67001091
|
| Top Plate with Bushings 67000004
|
| Touch-Up Paint-Black bottle 67000146
|
| Touch-Up Paint-Black spray can 67000121
|
| Touch-Up Paint-Classic Pewter bottle 67000147
|
| No Longer Available Touch-Up Paint-Classic Pewter can 67000111
|
| No Longer Available Touch-Up Paint-White bottle 67000145
|
| Bolt 67000122
|
| No Longer Available Connector, Tube 67000012
|
| Lat Hold Down, Adjustable 67000810
|
| Pad, Center, Curl And Lat Bar 67000168
|
| Retainer, Row Arm Cable 67000687
|
| Screw, Set 67000515
|
| No Longer Available Touch-Up Paint-Sterling Silver bottle 67000212
|
| Washer 67000029
|
| Washer 67000041
|
| 1/2" Cresent Ring 67000040
|
| 3.5"0 PULLEY 67000084
|
| Ab Pulley assembly-with pulley-TWO VERSIONS-Revised 9/20/02 67000867
|
| Ab Pulley Bracket-without pulley-TWO VERSIONS-Revised 9/20/02 67000838
|
| Adjustable Pulley Bracket-no pulley or hardware (main column) 67000986
|
| Adjustment Link, Seat Back, Row Station 67000829
|
| Assembly, Adjustable Pulley 67000990
|
| Assembly, Butterfly Arm, Left Side 67000619
|
| Assembly, Butterfly Arm, Right Side 67000618
|
| Assembly, Butterfly Cam, Left Side 67000621
|
| Assembly, Butterfly Cam, Right Side 67000620
|
| Assembly, Leg/Ab Seat Handle 67000865
|
| Assembly, Leg/Ab/Row Station/Column 67000866
|
| Assembly, Row Arm 67000859
|
| No Longer Available Attachement, Close Grip Press, Black 67000272
|
| No Longer Available Attachement, Close Grip Press, Left 67000221
|
| No Longer Available Attachement, Close Grip Press, Pewter 67000273
|
| No Longer Available Attachment, Close Grip Press, Right 67000220
|
| No Longer Available Attachment, Close Grip Press, Sterling Steel 67000274
|
| No Longer Available Attachment, Close Grip Press, White 67000275
|
| Bar, Seat Pivot, Row/Leg/Ab 67000610
|
| Bench Leg Stop Bar-used in leg/ab station 67000580
|
| Bolt 67000088
|
| Bolt 67000123
|
| Bolt 67000635
|
| Bolt 67000155
|
| Bolt 67000167
|
| Bolt, Shoulder 67000560
|
| Bolt-5/16-18 X 1.25 for 1850 top plate wheel assy. 67000591
|
| Bottom, Seat 67000133
|
| Box #1-VX18 Large 67001054
|
| Box #2-VX18 Leg/Ab 67001055
|
| Box-VX18 Inner 67001058
|
| No Longer Available Bracket, Cable 67000154
|
| Bracket, Low Pulley 6" 67000338
|
| Bracket, Press Arm Adjustment Latch 67000165
|
| Bracket-for double-moving pulley (2 required) 67000117
|
| Bumper Tube-for butterfly arm pawl 67000601
|
| Bumper, Double Stem 67000175
|
| Bumper, Row Arm Down Stop 67000718
|
| Bumper/Cover/Strip-(rubber) top plate wheel assembly where cable connects 67000589
|
| Bumper/Down Stop-press arm rest on press column 67000837
|
| Bumper/Plug 67000164
|
| Bushing, butterfly arm 67000134
|
| Bushing, butterfly arms, bronze 67000384
|
| Bushing, Split 67000766
|
| Bushing, Weight Plate 67000032
|
| Cable Assembly, Press Adjustment 33.8" 67000843
|
| Cable attachment for top plate wheel assy 67001142
|
| No Longer Available Cable Tie 67000112
|
| Cable Tie 67000571
|
| Cable-low pulley w/o 10-inch extension REVISION 269.20 long (11.25" stripped) " 67000919
|
| Cable-low pulley/leg extension set with 10-inch extension REVISION 67000944
|
| Cap, Bushing 67001194
|
| Clip, Row Seat Back 67000870
|
| Column Cap-main column 1850 67000836
|
| Column Cap-press column 1850 67000835
|
| Column Cap-press column SERVICE version for cable rub 67001137
|
| Cotter Pin 67000107
|
| Cover, Press Housing Plastic 67000842
|
| Cross Chest Fly Option Kit-converts standard butterfly to cross chest version 67001141
|
| No Longer Available Developer, Leg with contoured leg pads 67000824
|
| Diamond Label, Series VX 67000075
|
| Edge Trim 67000506
|
| End Cap, External, Round 1.75" 67000985
|
| End Cap, Round 67000161
|
| Floor Piece/Board-large triangular 67000841
|
| Guide, Nylon 67000050
|
| Hardware Kit-1850 67000853
|
| Knob, Adjustment, Yellow 67000198
|
| No Longer Available Label, Left Rotation 67000068
|
| Label, Squat, Left Side 67000135
|
| Label, Squat, Right Side 67000136
|
| Label-Manufactured by..." " 67000128
|
| Label-Warning..." for wt. guard " 67000127
|
| Lat Hold Down Pawl Latch Lever 67000156
|
| Lat Hold Down Tube Weldment 67000201
|
| Latch, Squat Attachment 67000160
|
| Lever, Press Adjust, Left 67000151
|
| Main Column assembly 67001057
|
| Main Frame assembly (part with squat platform) 67000854
|
| Manual-1850 67000847
|
| No Longer Available Member, Frame 67000832
|
| Member, Frame 67000831
|
| Nut 67000398
|
| Nut 67000063
|
| Nut, Joint Connector 67000085
|
| Nut, Joint Connector 67000024
|
| Nut, Locking 67000054
|
| Pad, Arm, Left 67000623
|
| Pad, Arm, Right 67000622
|
| Pad, Seat Bottom, Butterfly Station 67000196
|
| Pad, Squat Shoulder 67001088
|
| Pin, Clevis 67000642
|
| Pin, Dowel 67000574
|
| Pin, Roll 67000163
|
| Pin, Roll 67000725
|
| No Longer Available Pin, Row Seat Lock in Seat Back Adjustment 67000839
|
| No Longer Available Pin, Row Seat Pivot in Seat Back Adjustment 67000840
|
| Pin, Spring 67000114
|
| Pivot Bar/ Shaft 67000158
|
| Press Arm/Handle assembly for 1850/3850/vx-18/vx-38 67001059
|
| Press Housing assy (REVISED-4/14/03 Must use w/revised upper pivot #60400) 67000980
|
| Press Lever assy-LOWER 67000863
|
| Press Lever assy-UPPER (REVISED 4/14/03 Must use w/revised housing #60380) 67000981
|
| Press/Stack Column-VX18 67001056
|
| Pulley 67000526
|
| Pulley, Single Floating Moving 67000335
|
| Rack Housing, Row Seat Back Adjust 67000828
|
| Retainer 67000113
|
| Roll Pin 67000126
|
| Row Arm-weldment 67001049
|
| Row/AB Column Cap 67000360
|
| Safety Tread, Calf/Row Block 67000767
|
| Safety Tread, Squat Plate, Left 67000777
|
| Safety Tread, Squat Plate, Right 67000778
|
| Screw 67000411
|
| Screw 67000056
|
| Screw-1/4-20 X 1 black phillips 1850 press column (attaches press bumper) 67000857
|
| Seat Back Adjustment assembly-row/ab station 67000873
|
| Seat Back, Butterfly Station 67000179
|
| Seat Bottom, Assembly, Leg/Ab 67000864
|
| No Longer Available Seat Lock Strut/Latch 67001026
|
| Shaft, Long 67000643
|
| Shaft, Long 67000644
|
| Shaft, Seat Back, Row /Ab 67000827
|
| Shim Kit-for bench not centered w/press arm,need color, include drawing 67000834
|
| Shim/Spacer-1850 press station for pick-up slack reduction 67000844
|
| Silver 10" long "VECTRA" Label 67000074
|
| Spring Pin-.313 X 2.25 for 1850 top plate wheel assy. 67000518
|
| Spring, Latch 67000162
|
| Stop Pin, Press Adjust 67000046
|
| No Longer Available Tape 67000871
|
| Top Plage Wheel Weldment 67000353
|
| Top Plate Wheel assembly 67000588
|
| Touch-Up Paint-Sterling Silver can 67000211
|
| Touch-Up Paint-White spray can 67000120
|
| Trim Strip, Leg Developer 67000825
|
| No Longer Available Trim Strip, Leg Seat Lock 67000630
|
| Tube Closure/End Cap-1 X 2 X 10-14GA used on bench foot 67000408
|
| No Longer Available Upholstery-butterfly arm pad BACKING BOARD ONLY-left side 67000625
|
| No Longer Available Upholstery-butterfly arm pad BACKING BOARD ONLY-right side 67000624
|
| No Longer Available Upholstery-full set 1850 without bench (as shipped with machine) 67000849
|
| Upholstery-full set with VECTOR bench upholstery (6-hole seat back) 67001037
|
| Upholstery-seat back leg/ab station 67000761
|
| Upholstery-VECTOR bench full set 67001036
|
| Upper Stack Support assembly-with pulley & hardware 67000858
|
| Upper Stack Support-without pulley or hardware 67000833
|
| No Longer Available Vector Bench assembly 67001028
|
| Washer 67000143
|
| Washer, Black Plastic 67000412
|
| Weight Plate, 15 pound 67000988
|
| Weight Plate, 15 pound, Box of 5 67000989
|
| Weight Plate-box of five 10 pound plates 67000194
|
| No Longer Available Weldment, Leg Developer 67000823
|
| Weldment, Seat Back, Row Station 67000830
|
| Weldment, Seat Lever, Row Station 67000607
|