  Safety Keys Weight Pins Lubricants Bike Parts |
Catalog Part Matches (9818)
| 6043891 Motor, Resistance Resistance tension motor assembly. NOTE: The white cam will have to be adjusted during install because each machine may have minor differences. The cente. . . | |||
| 6044170 Console, Display Display console. This machine had several different versions of displays. Please check the pictures of the back of the console to be sure they are compati. . . | |||
| 62036539 Belt, Drive Drive belt 360J6 Please note there were two different sizes of this belt for this machine. If you need the 380J6 please order catalog number 620202. . . | |||
| 47000861 Cable Assembly, 141.75" Squat Cable Note: The squat cables for this machine are sold separately. If you need to replace both cables, you will need to buy a quantity of 2. | |||
| 47000887 Cable Assembly, Rod 151" Rod cable. NOTE: There are (2) of the cables required per machine. We sell them as a single cable so order (2) if needed. The b. . . | |||
| 18000012 Cable assembly, 90" Row cable for the Paramount 700 Lat pulldown machine. | |||
| 54001478 Motor, Resistance Tension gear motor. NOTE: The white cam will have to be adjusted during install because each machine may have minor differences. The center phillips sc. . . | |||
| 18000011 Cable Assembly, 130" Lat puldown cable for the Paramount 700 Lat pulldown machine. | |||
| 3018398 Cable Assembly, 103" Weight stack cable assembly. NOTE: This weight stack cable is used on units that do not have the leg extension units on their machine. | |||
| 7016529 Oval Knob Handle, "T", Yellow Yellow "T" handle used on Cybex models: 4616, 4705 NOTE: If you have not used an upgrade kit on your machine, you can use 7023651 as a generic rep. . . | |||
| 62020289 Belt, Drive Drive belt 380J6 Please note there were two different sizes of this belt for this machine. If you need the 360J6 please order catalog number 620365. . . | |||
| 9001593 Roller, Rear Rear roller. Please note this machine came with two different size rollers. This roller is 25.5". | |||
| 6019664 Pin, Locking Locking pin NOTE: This is not the weight stack pin for the machine. | |||
| 39000183 Pad, Roller Foam roller pad. This pad has an ID of 7/8". If this is too small to fit onto your machine, do not order this part. | |||
| 17000250 Power entry module, snap in Power cord connector on machine (snap in type) used on several Trimline models. | |||
| 7004764 Cable Assembly, Counter Balance Counter balance cable used Cybex models: Smith Machine - 5341. | |||
| 58000326 Cable assembly, 153" The Weight Stack Cable End on this machine has a threaded stud that attaches the Cable end to the Weight Stack. If your cable end is a Ball stud do not order th. . . | |||
| 7018098 Pad Leg, thigh or ankle pad | |||
| 7016528 Knob, Oval Oval shaped knob. NOTE: If you have not used an upgrade kit on your machine, you can use 7023651 as a generic replacement for the Knob. | |||
| 16000701 Motor, Resistance Resistance motor used on Diamondback models: 460EL, 460R, 46U. NOTE: The white cam will have to be adjusted during install because each machine m. . . | |||
| 39000571 Cable Assembly, 207" Cable, Inner/Outer Thigh, 207.75" | |||
| 3025616 Bearing, With block Linear bearing with mounting block used on Life Fitness models: PL06 - Smith Machine | |||
| 44000927 Belt, Drive Drive belt Please note, different versions of this machine used two different length belts. This belt is 61" if you need the 29" you will nee. . . | |||
| 24014156 Cable Assembly, Lat, 153", W/O Balls Lat cable without removeable balls. NOTE: There are (2) of the cables required per machine. We sell them as a single cable so order (2) if needed. There . . . | |||
| 39001598 Cable, Ab Crunch 161.5" Ab Crunch Cable ***NOTE*** Two differrent length cables were used for this machine. Please verify the length of the cable you are repl. . . | |||
Showing Parts: 3601 - 3625 Of 9818 | |||
|
Copyright 1995-2015 Fitness Plus Equipment Services, Inc. All Rights Reserved. |