Catalog Part Matches (1780)
9000427 Roller, Rear Rear roller. Please note this machine came with two different size rollers, please contact us with measurements before ordering. | |||
6019664 Pin, Locking Locking pin NOTE: This is not the weight stack pin for the machine. | |||
47000297 Belt, Drive NOTE: This machine used several different belts, please measure your belt and contact us to confirm which belt you need. | |||
17000250 Power entry module, snap in Power cord connector on machine (snap in type) used on several Trimline models. | |||
9000635 Treadbelt Treadmill walking belt. This machine used two different size treadbelts and deck. This belt is 118" If the 128" belt is needed you will need to order. Ca. . . | |||
62036539 Belt, Drive Drive belt 360J6 Please note there were two different sizes of this belt for this machine. If you need the 380J6 please order catalog number 620202. . . | |||
54001478 Motor, Resistance Tension gear motor. NOTE: The white cam will have to be adjusted during install because each machine may have minor differences. The center phillips sc. . . | |||
26000406 Switch, On/Off On / Off switch. Please note, you will get which ever switch we have in stock. Both the two and three pronged switches are acceptable. If you. . . | |||
7004764 Cable Assembly, Counter Balance Counter balance cable used Cybex models: Smith Machine - 5341. | |||
58000326 Cable assembly, 153" The Weight Stack Cable End on this machine has a threaded stud that attaches the Cable end to the Weight Stack. If your cable end is a Ball stud do not order th. . . | |||
15006086 Belt, Drive, 28" Drive belt. 28" Please measure your belt. This machine came with several versions and lengths of belts. | |||
7016528 Knob, Oval Oval shaped knob. NOTE: If you have not used an upgrade kit on your machine, you can use 7023651 as a generic replacement for the Knob. | |||
9001593 Roller, Rear Rear roller. Please note this machine came with two different size rollers. This roller is 25.5". | |||
3025616 Bearing, With block Linear bearing with mounting block used on Life Fitness models: PL06 - Smith Machine | |||
5002348 Cable Assembly, 30" Multi-hip cable assembly for the Pacific Fitness Zuma home gym. NOTE: You may need to remove the pulleys in order to install this cable on the machine. | |||
44000927 Belt, Drive Drive belt Please note, different versions of this machine used two different length belts. This belt is 61" if you need the 29" you will nee. . . | |||
44000125 Belt, Drive Drive belt Please note, different versions of this machine used two different length belts. This belt is 29" if you need the 61" you will nee. . . | |||
10004339 Cable Assembly 134" Lat puldown cable for the Paramount FL-33 Lat pulldown machine. | |||
6073957 Retainer, Key Machine retainer key. | |||
5004690 Power Cord Power cord NOTE: The original power cord for these machines is no longer available and the end of this cord may need to be modified to work with your m. . . | |||
40000979 Cable, Ratio 4:1 Cable Ratio 4:1 The 4-1 ratio machine will have two pulleys at the top of each weight stack | |||
15020194 Deck Spring Deck spring (cushion) used on Star Trac treadmill models: TR3900, TR4000, TR4500, TR5500 (PRO S), TR5600 (PRO). NOTE: Not all TR3900 & TR4000 used th. . . | |||
3092811 Controller, Motor, Refurbished REFURBISHED motor control board. This is for the domestic machine only. | |||
15001323 Belt, Drive, 28.5" Drive belt 28.5" Please measure your belt. This machine came with several versions and lengths of belts. | |||
24003375 Cable Assembly, 271" Low Pulley Cable Assembly NOTE: The cable assembly you receive may not be able to be taken apart for routing on the machine. If you cannot route the cabl. . . | |||
Showing Parts: 1426 - 1450 Of 1780 |